A simple adapter that relocates the viewfinder of the Lomo'Instant Wide to the centerline, above the lens, for easier and better composition. Prints as a single piece, with no supports or brims required (as tested on textured PEI), snaps on and off the camera, and requires no assembly or hardware. Tested with PET-G and PLA.
This part requires 60° overhangs. Most modern printers can achieve this out of the box, but if required, a special "skill issue edition" is included, sacrificing some design for 50° overhangs.
Tested on a Bambu A1 Mini on the default profile with zero configuration.
Source files included for FreeCAD 1.0-rc2. It is not recommended to open these source files in previous versions of FreeCAD.
| lomo-wide-centerline-adapter-016-sie.20241024-201802.FCBak | 642.4KB | |
| lomo-wide-centerline-adapter-016.FCStd | 634.4KB | |
| lomo-wide-centerline-adapter-mk1-skill-issue-edition.stl | 5.8MB | |
| lomo-wide-centerline-adapter-mk1.stl | 5.8MB |
