11.10.2024
+++ V1.0 +++

Hi all, this project is a modification to Logitech Shifter with ETS/ATS in mind, which allows to have two toggle switches (can be used for example for gears) and a thumbstick, which provides one more button and X/Y axis.
I personally use the thumbstick to rotate camera in cabin and when i press it, it centers the camera.

If you like this project, please consider leaving a tip as it helps me fund this hobby.
Similary, if you have any questions or comments, please feel free to leave them in Comment section. Will try to respond as soon as possible.

Printed parts:
1x Shifter Body
1x Shifter Cap
2x Shifter Plug
1x Stick by Zynker013 - https://www.thingiverse.com/thing:5350586

Other parts:
Screws:

• 4x M3*8
• 2x M3*12
• 1x M4*20

Inserts:

• 2x M3*8-4,2

1x Thumbstick

• I used this: https://pl.aliexpress.com/item/1005006341051647.html?spm=a2g0o.order_list.order_list_main.11.32131c24qwgxka&gatewayAdapt=glo2pol

2x Toggle Switches

• I used this: https://pl.aliexpress.com/item/1005005989323670.html?spm=a2g0o.order_list.order_list_main.17.32131c24qwgxka&gatewayAdapt=glo2pol

1x PCB Board

• I used this: https://www.pcbway.com/project/gifts_detail/Breakout_Module_Shield_PS2_Joystick_Game_Controller.html

Wires
2 part epoxy or any thick glue that bonds to your "Body" material and inserts
Arduino (in my case, pro micro)

The Arduino does not fit in the shifter itself, so you either need to make a box for it, hide it somewhere, or wait for my new project in which i will build a simple enclosure for it.

I created an instruction video on how I assemble it. Unfortunately one part has broken during the filming, due to an issue with print. Printed second time off camera with better supports and now it works fine.
https://youtu.be/WiiUoTFVboQ