I drive LFS. The simulation has supported vehicle mods for some time. The community is busy developing cool mods. Including motorcycles. However, driving with the steering wheel or keyboard was not very intuitive.

For this reason, I dared to try this solution. You can see the result now. With the steering wheel mod, I was able to control the motorcycles much better and after a while the driving feeling was really cool!

Included

The mod contains:

• Handlebar grips (ideally printed with TPU)
• Mounting clamps and clips for locking the handlebar
• Shifter extensions to continue to be able to shift manually

NOT included (must be purchased)

The handlebar itself is purchased (4cm thick). I found the right plastic tube in the plumbing department. :)

WARNING

DO NOT use a wooden handlebar! It is too heavy and can damage the clamps/clips and the steering wheel during wheel calibration!!!

Printing tips

Shifter Extensions

• Support: yes, recommended
• Infill: 15% or more
• Filament: PLA
• Number of pieces: 1x left / 1x right

Mounting Clamps

• Support: yes, recommended
• Infill: atleast 20%
• Filament: PLA
• Number of pieces: 1x left / 1x right

Mounting Clips

• Support: no
• Infill: atleast 20%
• Filament: PLA
• Number of pieces: 2x

Handle Grips

• Support: no
• Infill: Default (15%)
• Filament: TPU (with PLA not tested)
• Number of pieces: 2x