Simple log cabin made from 10 different pieces. The design is made with FreeCAD. I tweaked the facade and the roof tiles a bit after my own print but they should pose no problem fitting together. In order to build this cabin you need the following amounts of each piece:
Long Beam Bottom Front Half: 1
Long Beam Bottom Back Half: 1
Long Beam: 19
Medium Beam: 5
Short Beam: 17
Long Beam Top Front: 1
Facade: 2
Roof Tiles: 12
Chimney: 1
Ridge 105mm: 2 OR if your printspace is large enough:
Ridge 210mm: 1
If you like more windows or 2 small ones instead of a large, you can exchange some long beams by short ones. That would give you two small windows with a central stanchion made out of short beams. Or if you prefer a single small window, use medium beams for the other. Anyway, feel free to create different constructions using these basic building blocks and share your makes.
Makes a great gift for a 4 year old by the way.
| Chimney.FCStd | 10.1KB | |
| Chimney.stl | 11.4KB | |
| Facade.FCStd | 65.9KB | |
| Facade.stl | 53.5KB | |
| Long_Beam.FCStd | 43.5KB | |
| Long_Beam.stl | 37.6KB | |
| Long_Beam_Bottom_Back_Half.FCStd | 79.0KB | |
| Long_Beam_Bottom_Back_Half.stl | 27.4KB | |
| Long_Beam_Bottom_Front_Half.FCStd | 41.8KB | |
| Long_Beam_Bottom_Front_Half.stl | 31.2KB | |
| Long_Beam_Top_Front.FCStd | 49.3KB | |
| Long_Beam_Top_Front.stl | 42.8KB | |
| Medium_Beam.FCStd | 43.5KB | |
| Medium_Beam.stl | 37.7KB | |
| Ridge_105_mm.stl | 8.6KB | |
| Ridge_210mm.FCStd | 26.7KB | |
| Ridge_210mm.stl | 8.6KB | |
| Roof_Tile.FCStd | 27.3KB | |
| Roof_Tile.stl | 19.3KB | |
| Short_Beam.FCStd | 21.2KB | |
| Short_Beam.stl | 19.9KB |
