Loft Window Bracket (variable Position) 3D Printer Model
The file 'Loft Window Bracket (variable Position) 3D Printer Model' is (stl) file type, size is 362.7KB.
The file 'Loft Window Bracket (variable Position) 3D Printer Model' is (stl) file type, size is 362.7KB.
My loft window would only hold position at fully open or closed - the gas struts that allowed it to open didn't have intermediate positions...
So i designed and printed a variable position bracket to allow me to hold the window open at any position i wanted. Can also be used to keep box,trunk, etc. lids open
Printed in PLA @ 0.3mm with a high infill for main support parts
No supports or rafts needed (small inbuilt support to remove from 'Window_base.stl)
Enjoy!
UPDATE 280915:
Replaced the file: LoftWindow_base.stl with LoftWindow_base_v2.stl.
The break off supports weren't slicing in Cura. This version has slightly wider supports which solves that issue.
DISCLAIMER:
PLEASE, please DONOT use this bracket as the only support for the window or lid - it should only be used as a stay bracket and in a light loading situation.
NEVER use this bracket as a safety device in an environment where small children have access to open windows.
I accept no liability for any damage or injury caused by or as a result by the use of this item. ©2014
| LoftWindow_base_v2.stl | 308.9KB | |
| LoftWindow_bracket.stl | 224.1KB | |
| LoftWindow_catch_base.stl | 133.8KB | |
| LoftWindow_catch_slider.stl | 180.8KB | |
| LoftWindow_knob.stl | 280.0KB |
