LOCK COTTAGE Mk2 3D Printer Model
The file 'LOCK COTTAGE Mk2 3D Printer Model' is (stl) file type, size is 5.0 MB.
The file 'LOCK COTTAGE Mk2 3D Printer Model' is (stl) file type, size is 5.0 MB.
Please read my profile before downloading.
I sincerely hope others will enjoy my designs. I am always pleased to hear about successful or useful prints. Please post a photo of successful ‘makes’ if you can.
I have found some of my designs for sale on eBay and Etsy. Please do not use my designs commercially, they have taken me a long time to produce and I share them for free, not for others to make profit.
LOCK COTTAGE Mk2
UPDATED 14 OCT 2021
(Modified extra files added 15 DEC 2022)
This is a redesign of my previous lock cottage. It is intended to be suitable for OO/HO scale. (Please check dimensions below). I have lowered the roof in order to give it better proportions, the porch now intersects with the roof and the corners have large stones.
Dimensions
Height of door - approximately 22mm (about 1.7 metres in OO)
Length - 79mm
Width - 46mm
Although I've called it a cottage, it's probably too small for that. In OO scale it is about 6metres long. (Probably bigger than an 'affordable' flat in London.)
I hope this design is useful. It prints okay - use a brim.
Any issues? Please leave a polite comment and I will attempt a modification.
Photos of successful prints would be great! I have included a photograph that shows the model on my own HOe layout.
MODIFICATIONS
In response to a request, I have uploaded three files that facilitate printing the ROOF and the base separately. The BASE includes some extra supports for the porch that can be cut away after printing. BASE_INVERTED prints the base 'upsidedown' to overcome any difficulties with overhangs. I have not test printed these files. If they do not print successfully, please let me know and I will modify.
A REQUEST
I have found some of my designs for sale on eBay and Etsy. Please do not use my designs commercially, they have taken me a long time to produce and I share them for free, not for others to make profit.
I am pleased that some of my designs are being used to help raise money for an Air Ambulance charity. I was happy to give my permission for this.
| BASE.stl |
| BASE_INVERTED.stl |
| Lock_Cottage_Mk2a.stl |
| ROOF.stl |
