This is a spin-down D20 that can be weighted on the 20 or the 1 sides.
I used two 8mm neodymium magnets glued into the 20 side for the weight
The peg is used to align the faces correctly, I first glued the weights in place then glued the two halves together.
| D20V3_Left.SLDPRT | 2.7MB | |
| D20V3_Left.STL | 116.0KB | |
| D20V3_peg.SLDPRT | 50.6KB | |
| D20V3_peg.STL | 684.0B | |
| D20V3_Right.SLDPRT | 2.9MB | |
| D20V3_Right.STL | 148.0KB |
