LM2596 BUCK CONVERTER HOUSING 3D Printer Model
The file 'LM2596 BUCK CONVERTER HOUSING 3D Printer Model' is (stl) file type, size is 340.2KB.
The file 'LM2596 BUCK CONVERTER HOUSING 3D Printer Model' is (stl) file type, size is 340.2KB.
This enclosure/housing is for the LM2596 without screw-terminals. I don't know if the ones with terminals will fit. I made this because none of the housings I saw met my design needs. I procured a menagerie of different connectors and put them to good use. I also glued them in place. My manufacturer of the LM2596 claims it is rated to 3A.... I always keep it a little lower and because I use them mainly to step down from 24V to 12V for fans and the fans are mostly below 1A each..... 3 output plugs and we are safe.
Please See The Pictures (I got them on Ali)
WHITE INPUT CONNECTOR - 10mm x 5.5mm x 13mm (2 pin)
BLACK OUTPUT PLUG- 11.6mm diameter threads, 14mm outer diameter (3 pin, only use 2)
I made 3m nut indents on the bottom if you want to use the screws but you don't have to.
| LM2596base.stl | 724.0KB | |
| LM2596lid.stl | 465.7KB |
