Llzbot Taz 6: Single Extruder Fan Grills And Housing And 3D Screws 3D Printer Model
The file 'Llzbot Taz 6: Single Extruder Fan Grills And Housing And 3D Screws 3D Printer Model' is (STL,zip) file type, size is 10.8MB.
The file 'Llzbot Taz 6: Single Extruder Fan Grills And Housing And 3D Screws 3D Printer Model' is (STL,zip) file type, size is 10.8MB.
A couple of my friends want a simple version of my fan grills for their single extruders.
{A note of caution:}
The left fan grill and left 3D printed screws go to the left fan.
The right fan grill and the right 3D printed screws go to the right fan.
The front fan grill and the front 3D printed screws go to the front fan.
After install the housing and the fan grills on the extruder, make sure both the right and left switches can be activate by the extruder freely.
Move the extruder (SLOWLY) all the way to the right to hear the right switch click.
Move the extruder (SLOWLY) all the way to the left to hear the left switch click.
Enjoy!
| 40mm_FAN_HOUSING.STL | 2.9MB | |
| 40mm_FRONT_FANGRIL.STL | 1.8MB | |
| 40mm_FRONT_FANGRIL_FRONT_SCREW.zip | 1.5MB | |
| 40mm_FRONT_SCREW.STL | 1.9MB | |
| 40mm_LEFT_FANGRIL.STL | 1.8MB | |
| 40mm_LEFT_FANGRIL_LEFT_SCREW.zip | 1.8MB | |
| 40mm_LEFT_SCREW.STL | 2.5MB | |
| 40mm_RIGHT_FANGRILL.STL | 501.6KB | |
| 40mm_RIGHT_FANGRILL_RIGHT_SCREW.zip | 1.5MB | |
| 40mm_RIGHT_SCREW.STL | 2.8MB |
