Small EDC knife from cheap but good Norwegian made stainless (9Cr18MoV) blade. (Scandi grind). Lifetime warranty blades.

Have you ever looked for a small bushcraft knife that fits like a glove. Do all carving and fire task with ease without weighing down your pack and wallet? I'm so happy with it. Leftie or righty does not matter.

OBSERV this is a sharp tool!

Printed in PETG and is very durable after gluing the blade with epoxy. Print with blade side down flat and make sure it won't fall down with a skirt or similar. I made it 4 perimeters and full honeycomb 30% infill. Make sure the blade is in the bottom and pressed down in the front groove when gluing. Do not touch during the full hardening period (5min epoxy needs 24h), otherwise the epoxy won't hold as good. It could be a bit of a tight fit depending on print settings, a needle file will fix that.

If the sheet is much too tight make sure the print sticks to the bed properly. A bit of extra friction is designed in the last 3 mm.

Order the blade and print out the handle, choose the color you want, glue it together and you are ready to hit the wild! They often have these on sale too ~120 SEK.

Blade:
https://www.brusletto.se/knivmaterial/knivblad/knivblad-rein

Total Length (cm)
13,6
Blade Length (cm)
7,2
Blade Thickness (mm)
2,2
Weight (grams)
70
Blade Steel
9Cr18MoV
Color
Stål