The bear and other designs are now also available on shapeways:
http://www.shapeways.com/shops/animoos
A little Bear reaching for the stars, a cookie jar or maybe your hand? That's up to you. Enjoy.
He stands 154mm tall but can easily be printed smaller or bigger.
Bear.stl is the whole bear in one piece, if you wanna print him in one go. But you'll need support structures for it to work.
If you print him in 2 pieces (bear(top).stl and Bear (bottom).stl) no support is neede you some infill is definitely recommended. Glue the two pieces together with some ABS sludge.
Unfortunately my solidoodle 2 has some bad z-wobble that I cannot fix. So I had to file down the print, stuck it in an acetone vapor bath which usually turns the model way too glossy. You can fix it with a Matte f-finish spray which gives the model a nice waxy finish.
modeled in Silo 2, posed in Maya, booled in C4D, resurfaced with Meshmixer, split with netfabb, sliced with Slic3r, printed with Repetier Host on a Solidoodle 2, ABS
| Bear.stl | 26.3MB | |
| Bear_Bottom.stl | 14.3MB | |
| Bear_Top.stl | 12.3MB |
