Lithophane Light Box 3D Printer Model
The file 'Lithophane Light Box 3D Printer Model' is (stl,step) file type, size is 60.2MB.
The file 'Lithophane Light Box 3D Printer Model' is (stl,step) file type, size is 60.2MB.
A lightbox to house some LEDs sourced from a cheap rechargeable light. Curved box is designed to take custom lithophanes created using the following settings:
See Video:
https://youtu.be/3i6UzTQTSZU
Image to Lithophane Website:
https://3dp.rocks/lithophane/
Settings used for Outer Curve lithophane.
Model Settings:
Maximum Size - 150mm
Thickness - 2mm
Border - 4mm
Thinnest Layer - 0.8mm
Vectors Per Pixel - 10
Base/Stand Depth - 0
Curve - 0
Image Settings:
Positive Image
Mirror Image Off
Flip Image Off
Manual Refresh
Repeat X Count: 1
Repeat Y Count: 1
Mirror Repeat Off
Flip Repeat Off
Image preparation:
Crop your image to 2:3 (ratio)
Save image as .jpg less than 1mbs
Slicing settings for PolyTerra™ PLA Cotton White (Start with generic PLA settings):
Extrusion Multiplier - 0.9 (90%)
Extrusion Width - 0.4
Shells/Perimeters - 3
Infill - 0%
Layer Height - 0.15mm
Allow single extrusion fill - (Internal 20%)
Print with a Brim to help with bed adhesion
| Light_Box_Frame.stl | 449.0KB | |
| Light_Box_Lid.stl | 59.2KB | |
| Lithopane_Light_Box.step | 526.8KB | |
| panda.stl | 146.8MB |
