Lithophane Light Box 3D Printer Model
The file 'Lithophane Light Box 3D Printer Model' is (stl) file type, size is 512.8KB.
The file 'Lithophane Light Box 3D Printer Model' is (stl) file type, size is 512.8KB.
This is my take on the Lithophane lamp/Gift box. It has been designed to take flat 100 x 100mm Lithophane panels all round. I have also included a solid top panel.
I used http://3dp.rocks/lithophane/ to create 3mm thick Lithophanes. Under settings, Image settings I added a 3mm border.
The light is a 220vac 4w LED Bulb (Pick your own correct voltage) & a bulb fitting that screws into the bottom. https://www.banggood.com/Non-Dimmable-E27-4W-10-SMD-5730-LED-Pure-White-Warm-White-Light-Lamp-Bulb-AC85-265V-p-1138354.html?rmmds=search&stayold=1&ID=3837&cur_warehouse=CN
The mounting holes is 5mm deep, just add the thickness of your lamp holder to calculate the length of M3 self tapper needed. Similar to this: https://hydroponic.co.za/hydroponics/e27-lamp-holder/?gclid=Cj0KCQjwxN_XBRCFARIsAIufy1YptC5M1RjLr7rU-P5_vHvyS06yx8kTufbkQo3G-_3V8JLmCSaEfNIaAviPEALw_wcB
The base includes a cable lock to keep the cable from pulling out.
Use 2 M3 x 16mm to secure the cable lock.
The cable is 6mm OD. The switch is a 2 pole switch with a cutout dimension of 13 x 19mm.
https://www.banggood.com/1Pcs-2Pin-Snap-in-On-Off-Rocker-Switch-Control-Black-p-920431.html?rmmds=search&cur_warehouse=CN
The box is held together wih 8 M3 x 20 self tapping screws.
| Box_Bottom.stl | 794.2KB | |
| Box_Corner.stl | 409.9KB | |
| Box_SolidTop.stl | 436.9KB | |
| Box_Top.stl | 438.4KB |
