Lithophane Lamp (everything Screwable) 3D Printer Model
The file 'Lithophane Lamp (everything Screwable) 3D Printer Model' is (3mf,stl) file type, size is 426.7KB.
The file 'Lithophane Lamp (everything Screwable) 3D Printer Model' is (3mf,stl) file type, size is 426.7KB.
At this Lithophane's structure everything is screwable. No glue needed. So the Lithophanes can get replaced any time.
The structure is made for panels size 130x130x3mm. To get a tolerance I designed it for 131x131x3.5mm.
For the lamp I used a G9 LED (lamp shouldn't get hot if you use PLA).
The holes are closed with one layer, to make it printable without support material. Open the holes with a screwdriver or something pointy.
I suggest to print cap 2 upside down.
I used this materials:
+) 2x M2x20mm screws
+) 4x M2x12mm screws
+) 6x M2 Nuts
+) G9 Lamp holder (https://www.amazon.de/gp/product/B00P65F040/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1)
+) cable with switch (https://www.amazon.de/gp/product/B002DAOX58/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1)
+) G9 LED (https://www.amazon.de/gp/product/B0861C1HWH/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1)
| bottom_structure.3mf | 102.7KB | |
| bottom_structure.stl | 401.1KB | |
| cap_1.3mf | 80.8KB | |
| cap_1.stl | 197.2KB | |
| cap_2.3mf | 78.7KB | |
| cap_2.stl | 219.8KB |
