This lamp was created as a gift for loved ones.
Four 10x10cm lithophane images can be placed in the lamp shade.
The lampshade can be freely rotated in a horizontal plane.
To perform it, in addition to 3D printed elements, I used:
To prepare STL files from photos, I used the site http://3dp.rocks/lithophane/
The most important settings are model dimensions - 100x100mm and thickness 3mm, and in Image Settings - image as positive.
Lithophane images were printed from the white PLA, in an upright position, along the Y axis, and with Raft.
Layer Height 0.2mm
Print Speed 30mm/s
Infill Seed 30mm/s
Wall Seed 15mm/s
Outer Wall Speed 15mm/s
Inner Wall Speed 20mm/s
Raft Air Gap 0.3mm
Raft Top Layers 1
| Lithophane_Lamp_4x_10x10cm_Roto_v3_Base.stl | 318.4KB | |
| Lithophane_Lamp_4x_10x10cm_Roto_v3_Frame.stl | 166.3KB | |
| Lithophane_Lamp_4x_10x10cm_Roto_v3_Ring.stl | 84.1KB | |
| Lithophane_Lamp_4x_10x10cm_Roto_v3_Top.stl | 358.1KB |
