You're looking for a nice gift? For Christmas, birthday, Valentine's day, or just yourself?
You've found it: The Litho.BOX!
Litho.BOX is a compact stand for your lithophane with LED backlight. The frame is wide enough to spread the light evenly. Note: 5.8mm of the lithophane will be covered at every side so you can set a border in the lithophane accordingly (but you don't have to :). The sizes in the names correlate to the lithophane's dimensions (e.g. 10x10 will fit a 10 by 10cm lithophane).
All you need is
The Litho.BOX features a little support for the power jack socket, but can also be used without it. Litho.BOX also is suited for 8mm and 10mm wide LED strips.
If you need differently sized boxes just let me know in the comments! The model is not customizable as I modeled it in Fusion 360.
| LithoBox_10x10_Base_.stl | 669.6KB | |
| LithoBox_10x10_Lid.stl | 415.7KB | |
| LithoBox_12x9_Base_.stl | 678.0KB | |
| LithoBox_12x9_Lid.stl | 436.8KB | |
| LithoBox_14x14_Base_.stl | 730.0KB | |
| LithoBox_14x14_Lid.stl | 563.4KB | |
| LithoBox_16x9_Base_.stl | 705.6KB | |
| LithoBox_16x9_Lid.stl | 510.6KB | |
| LithoBox_6x4inch_Base.stl | 650.4KB | |
| LithoBox_6x4inch_Lid.stl | 244.6KB | |
| LithoBox_7x7_Base_.stl | 640.6KB | |
| LithoBox_7x7_Lid.stl | 313.0KB |
