Lion Standing (Hueforge) 3D Printer Model
The file 'Lion Standing (Hueforge) 3D Printer Model' is (stl) file type, size is 31.6MB.
The file 'Lion Standing (Hueforge) 3D Printer Model' is (stl) file type, size is 31.6MB.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 1.6mm
Filaments Used:
PLA Sunlu Meta Grey Transmission Distance: 3.5
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA Overture Matte White Transmission Distance: 3.7
PLA Overture White Transmission Distance: 4.4
This print uses 4 unique filaments
Swap Instructions:
Start with Grey
At layer #2 (0.24mm) swap to Charcoal Black
At layer #7 (0.64mm) swap to White
At layer #9 (0.8mm) swap to White for the rest.
| Lion_standing_Front_200x200.stl | 95.9MB |
