UPDATE 3/31: Since the pin that holds the key (on the bottom part of the lock) breaks too easily, I have updated two of the parts. On Lock_Bottom V2 I made the pin thicker, and on Key V2 I made the hole in the key larger for the thicker pin.
For all parts except lock top, I recommend 100% infill for maximum strength.
| Key.STL |
| Key_V2.STL |
| Lion_Lock_Top.STL |
| Lock_Bottom.STL |
| Lock_Bottom_V2.STL |
| Shackle.STL |
| Spring.STL |
| Spring_Lever.STL |
| Tongue.STL |
