Lilygo T Display S3 AMOLED Version 2.0 Case 3D Printer Model
The file 'Lilygo T Display S3 AMOLED Version 2.0 Case 3D Printer Model' is (step,stl) file type, size is 129.7KB.
The file 'Lilygo T Display S3 AMOLED Version 2.0 Case 3D Printer Model' is (step,stl) file type, size is 129.7KB.
Lilygo T Display S3 AMOLED Version 2.0 Case
Slimline case for the Lilygo T Display S3 AMOLED Version 2.0
This design is only for the Version 2.0 variant offered by Lilygo.
I have a case for the original T Display S3 AMOLED here :-
https://www.thingiverse.com/thing:6095867
Screwless design that clips together firmly.
A spudger maybe required to spring one side to help the back to clip in.
It's a snug fit.
Likewise the spudger is needed to get it apart.
I've included a variant of the case to suit most needs
Bottom with gpio pin header slotsBottom with no slotsIf you heed holes for the Stemma connectors just ask.
All printed in PLA with no supports required (but I did use them just for the USB C slot but its not really necessary)
I've included STEP files as well as STL to make it easier to modify if required
Hope this helps someone.
| S3_AMOLED_bottom_For_Version_2.0__NO_gpio_slots_v3.step | 129.1KB | |
| S3_AMOLED_bottom_For_Version_2.0__NO_gpio_slots_v3.stl | 42.6KB | |
| S3_AMOLED_bottom_For_Version_2.0__with_gpio_slots_v3.step | 156.7KB | |
| S3_AMOLED_bottom_For_Version_2.0__with_gpio_slots_v3.stl | 44.9KB | |
| S3_AMOLED_top_Version_2.0_v9.step | 170.7KB | |
| S3_AMOLED_top_Version_2.0_v9.stl | 112.3KB |
