Lightiny Ver. 2 Replacement Lid (ATEEZ Lightstick Part) 3D Printer Model
The file 'Lightiny Ver. 2 Replacement Lid (ATEEZ Lightstick Part) 3D Printer Model' is (stl) file type, size is 133.1KB.
The file 'Lightiny Ver. 2 Replacement Lid (ATEEZ Lightstick Part) 3D Printer Model' is (stl) file type, size is 133.1KB.
Printing Recommendations: Use snug supports on the build plate only for the dome part of the print and they should be easy to pull out after printing.
In the event you "Break The Wall" a little bit too hard when you go to see ATEEZ on tour! (Heard that this was a problem where the caps would fly off of the lightiny ver. 2 during the concert, so I wanted to make a version that you could print to replace it or customize your own!)
I used my own official cap/lid as reference to build this and tested it and both work! There is a plain cap without text on it and then a file for a cap with "BREAK THE WALL" on it. Feel free to customize the plain cap with your own words or add-ons!
(I do not own the copyright or rights to the Lightiny or anything ATEEZ, this is merely just a crafty Atiny that wants to help out!)
| lightinycapbreakthewall.stl | 274.7KB | |
| lightinylidv5.stl | 154.4KB |
![Christmas Paper Craft Like Scene Lamp[stp Included] 3D Printer Model](https://res.3axis.co/887d9ce9-0704-4cde-b56e-7c7884717e70/images/9c14c803-348d-4fc7-b7df-c6ccc9505bfb_thumb.jpg)
