Lighthouse Night Light 3D Printer Model
The file 'Lighthouse Night Light 3D Printer Model' is (stl) file type, size is 18.9MB.
The file 'Lighthouse Night Light 3D Printer Model' is (stl) file type, size is 18.9MB.
This is a lighthouse that can also act as a night light.
Do not scale down or the threads won't work and the light socket won't fit!
No supports or brim are required.
There is a hole on the back of the body that allows a 12VDC barrel connector to be epoxied in.
There are 2 versions of the Lookout Window Insulator - One has a generic hole to allow a wiring harness to pass through, the other is designed to accept the following wiring harness: https://www.amazon.com/dp/B07FSK5LTH
Light Bulb: https://www.amazon.com/dp/B002CYQ5N8
Barrel Connector: https://www.amazon.com/dp/B0D5H4DZTJ
The Lookout Window Insulator and Roof should be made of black material so it blocks light from emitting from anywhere except the windows. The Window Glass should be made of yellow or whatever color light you want to shine through.
The model shown was printed using ABS and a .12mm layer height.
Please Like and upload a make!
If you like illuminated designs have a look at the Illuminated Lantern: https://www.thingiverse.com/thing:6820525
and
Party Light Collection: https://www.thingiverse.com/thing:6843408
| Lighthouse_-_Base.stl | 14.7MB | |
| Lighthouse_-_Base_Lock_Screw.stl | 1.5MB | |
| Lighthouse_-_Body.stl | 23.8MB | |
| Lighthouse_-_Lookout_Window_Glass_-_Yellow.stl | 585.8KB | |
| Lighthouse_-_Lookout_Window_Insulator_-_Black.stl | 1.1MB | |
| Lighthouse_-_Lookout_Window_Insulator_-_Generic_-_Black.stl | 1.1MB | |
| Lighthouse_-_Roof_-_Black.stl | 3.6MB |
