The file 'Light Trap 3D Printer Model' is (stl) file type, size is 203.8KB.
This is a light trap. The design has three "lobes" rotated 120° each. The "middle" lobe must be glued in place. A mosquito (or better pollen) net is meant to be fitted between the "inner" and "outer" parts.
Requires approx. 75 g material and is thus one of the most economical light traps.
inner.stl | 377.8KB | |
middle.stl | 94.3KB | |
outer.stl | 259.1KB |