Light-duty Mouse Shelving Brackets 3D Printer Model
The file 'Light-duty Mouse Shelving Brackets 3D Printer Model' is (STL) file type, size is 29.6KB.
The file 'Light-duty Mouse Shelving Brackets 3D Printer Model' is (STL) file type, size is 29.6KB.
My partner is a big fan of the immortal mouse, and was looking for some light-duty shelving to stick to the wall for displaying various small trinkets. I whipped up an interesting positive/negative space shelf bracket, and it came out better than I expected!
One file supplied for the left side, simply mirror it in your slicer of choice for the right side!
This is designed to work with the 0.25" x 3.5" pre-cut project wood available at most large chain hardware stores (I got the red oak pieces shown at Lowes). 2 foot lengths should be a good maximum, otherwise the wood will sag in the middle with even a small amount of weight.
I stuck these on the wall using two small Command strips on each bracket, one at the top and one at the bottom. They are holding up to much more weight than I expected so far!
| Light-Duty_mouse_shelving.STL | 115.6KB |
