Hi, this is a simple standard light bulb stand to hold these cute plant vases or the modified lamps (there are many videos on how to do it)
It has a removable cap so you can put a flower in it or in case it needs watering. In the photos you see a vase with lateral feed.
It´s printed in three parts to avoid the use of support but it will need gluing in this version.
It took about 4 hours to print with 0.2mm, 20% infill and linear advance:
• PortaBombillaBase.stl: almost 3 hours
• PortaBombillaTope.stl: 35 min
• PortaBombillaTapa: 17 min
Suggestions on changes are welcomed!
------- V2 ------------
Changed files to solve a couple of issues:
• Loose access to the lightbulb
• Wider Top for a better gluing
• Please consider using 40% infill to improve rigidity
| PortaBombillaBase_V2.stl |
| PortaBombillaTapa_V2.stl |
| PortaBombillaTope_V2.stl |
