This is a large project, beware.
The final size of the shelf is
x = 250 mm ~10 in
y = 850 mm ~ 33.5 in
z = 2541 mm ~ 100 in (8.33 ft)
Printing recommendations:
8 outside layer! You need strength
No need for support
Infill 25-50% (if you are patient enough - long prints)
If you plan to display heavy stuff, plan for infill accordingly
What you will need to print:
2x Base End
1x Base Middle Bottom
1x Base Middle Top
5x Square Box
6x Rectangular Box Horizontal
6x Rectangular Box Vertical
11x 10 cm Cylinder
3x 14.8 cm Cylinder
1x Top 1
1x Top 2
1x Top 3
For the toppers, feel free to drop the outside layers to 2, as they are just decorative, won't need to hold any weight.
| 11x_10cm_Cylinder.stl | 49.9KB | |
| 2x_Base_End.stl | 300.7KB | |
| 2x_Rectangular_Box_Horizontal.stl | 501.1KB | |
| 2x_Rectangular_Box_Vertical.stl | 401.1KB | |
| 3x_14.8cm_Cylinder.stl | 49.9KB | |
| Base_middle_bottom.stl | 200.7KB | |
| Base_middle_Top.stl | 300.7KB | |
| Shelf.stl | 16.4MB | |
| Square_Box.stl | 201.6KB | |
| Top_1.stl | 3.2MB | |
| Top_2.stl | 3.2MB | |
| Top_3.stl | 3.2MB |
