LIDLstick 3D Printer Model
The file 'LIDLstick 3D Printer Model' is (3mf,stl) file type, size is 1.6MB.
The file 'LIDLstick 3D Printer Model' is (3mf,stl) file type, size is 1.6MB.
LIDLstick
Included preconfigured 3MF files for easiest printing.
Will add any modifications as i create them.
** 25/08/24 Added V-Tail Alignment tool to hold V-Tail straight while connecting rods.
Feel free to Add/Modify and Share.
1 x 7.9-8 mm carbon tube. I use arrow shaft.
4 x 20 mm long 4mm carbon tubes for attaching wing.
2 x 75 mm long 4mm carbon tubes for vtail hinges.
| BatteryTray.3mf | 160.3KB | |
| BatteryTray.stl | 225.5KB | |
| LandingGear.3mf | 220.2KB | |
| LandingGear.stl | 277.4KB | |
| MotorMount.stl | 456.6KB | |
| Mounts.3mf | 640.3KB | |
| ServoMountFront.stl | 85.4KB | |
| ServoMountRear.stl | 91.1KB | |
| VTailAlignmentTool.3mf | 83.2KB | |
| VTailAlignmentTool.stl | 6.9KB | |
| VtailLeft.3mf | 133.6KB | |
| VTailLeft.stl | 108.2KB | |
| VTailMount.stl | 180.1KB | |
| VtailRight.3mf | 133.5KB | |
| VTailRight.stl | 108.2KB | |
| WingMountFront.stl | 277.3KB | |
| WingMountRear.stl | 277.4KB |
