Libra Double Barreled 40mm Airsoft Grenade For Bambu Printers 3D Printer Model
The file 'Libra Double Barreled 40mm Airsoft Grenade For Bambu Printers 3D Printer Model' is (stl,f3d,3mf) file type, size is 10.9MB.
The file 'Libra Double Barreled 40mm Airsoft Grenade For Bambu Printers 3D Printer Model' is (stl,f3d,3mf) file type, size is 10.9MB.
This is a remix of the Libra which was modeled by one of my favorite creators, Shirley Productions.
The original files were just a hair too large to print on a Bambu P1S/P1P/X1 so I've modified the frames and barrels to fit most Bambu build plates while leaving the original geometry intact. It's a tight fit on the build plate but you'll be fine.
Fusion and 3MF files are included.
Print all of the pins with maximum wall settings and be sure to print two of the 5x80 pins. Glue them in place and blast away.
Link to original files:
https://www.printables.com/model/555984-libra-double-barrel-airsoft-40mm-shotgungrenade-la
Link to Shirley's Printables page:
https://www.printables.com/@ShirleyProductions
| Bambu_Left_Frame.stl | 223.0KB | |
| Bambu_Right_Frame.stl | 250.6KB | |
| Bambu_Shortened_Barrels.stl | 231.1KB | |
| Barrels.stl | 175.5KB | |
| Barrel_lock.stl | 16.5KB | |
| firing_pin.stl | 29.2KB | |
| Firing_pin_spacer.stl | 35.8KB | |
| Left_frame_fullstock.stl | 209.9KB | |
| Left_frame_sawed_off.stl | 218.6KB | |
| Left_frame_sawed_off_For_Bambu_Printers.f3d | 5.0MB | |
| left_trigger_in_line.stl | 39.6KB | |
| left_trigger_side_by_side.stl | 24.4KB | |
| PIN_5x30.stl | 23.3KB | |
| PIN_5x35.stl | 23.3KB | |
| PIN_5x55.stl | 23.3KB | |
| PIN_5x80.stl | 23.3KB | |
| Right_frame_fullstock.stl | 223.5KB | |
| Right_frame_sawed_off.stl | 243.4KB | |
| Right_Frame_sawed_off_For_Bambu_Printers.f3d | 5.4MB | |
| right_trigger_in_line.stl | 26.4KB | |
| right_trigger_side_by_side.stl | 24.4KB | |
| Shortened_Barrels.3mf | 63.0KB | |
| Stock_fullstock.stl | 738.9KB |
