Liberty Ship (RC) – Revision 5 3D Printer Model
The file 'Liberty Ship (RC) – Revision 5 3D Printer Model' is (stl,ipt,stp) file type, size is 158.5 MB.
The file 'Liberty Ship (RC) – Revision 5 3D Printer Model' is (stl,ipt,stp) file type, size is 158.5 MB.
UPDATE 14/12/2023 - CAD FILES OF HULL SECTIONS ADDED
UPDATE 07/11/2023 - EXTRA LARGER THAN SCALE RUDDERS ADDED FOR BETTER STEERING PERFORMANCE
UPDATE 03/10/2022 - RUDDER DRUM ADDED (TILLER)
UPDATE 30/04/2021 - TWO PIECE HULL, SPLIT AT THE DECK, ADDED
UPDATE 23/03/2021 - SINGLE PIECE HULL AND SINGLE PIECE SUPERSTRUCTURE ADDED
UPDATE 01/06/2020 - REVISED SUPERSTRUCTURE PARTS AND STERN
UPDATE 31/05/2020 - NEW FILES - HIGHER RESOLUTION
This final version of this beast should provide you with all the parts to build a complete ship, now with a superstructure and a basic level of detail.
This version is to render all previous versions obsolete.
You will also need to source a 150mm x 6mm propeller tube, 35mm propeller, 9 gram servo, a 28mm diameter motor, 2mm wire for the rudder post, various motor shaft couplings, 3mm dowel to join hull sections together and a large bucket of glue. See pictures for locations and quantities of parts.
Masts are 6mm dowel. Fwd. masts 180mm long. Aft. mast 150mm long.
I realise it has now been five years since I started this project and would like to thank all those who have been supportive about the developing design and even built it.
Unless I find a massive mistake, this is the final form. I hope you have fun building and operating it, I certainly had fun designing it.
All the best and good luck,
John
| LIBERTY_SHIP_V5.stl |
| LIBERTY_SHIP_V5_FUNNEL.stl |
| LIBERTY_SHIP_V5_FUNNEL_CAP.stl |
| LIBERTY_SHIP_V5_FUNNEL_VENT_COWL.stl |
| LIBERTY_SHIP_V5_GUN_20MM.stl |
| LIBERTY_SHIP_V5_GUN_3_INCH.stl |
| LIBERTY_SHIP_V5_GUN_5_INCH.stl |
| LIBERTY_SHIP_V5_GUN_DECK_AFT.stl |
| LIBERTY_SHIP_V5_GUN_DECK_FWD.stl |
| LIBERTY_SHIP_V5_HATCH_01.stl |
| LIBERTY_SHIP_V5_HATCH_02.stl |
| LIBERTY_SHIP_V5_HATCH_03.stl |
| LIBERTY_SHIP_V5_HATCH_04.stl |
| LIBERTY_SHIP_V5_HATCH_05.stl |
| LIBERTY_SHIP_V5_HULL_SECTION_01.ipt |
| LIBERTY_SHIP_V5_HULL_SECTION_01.stl |
| LIBERTY_SHIP_V5_HULL_SECTION_02.ipt |
| LIBERTY_SHIP_V5_HULL_SECTION_02.stl |
| LIBERTY_SHIP_V5_HULL_SECTION_03.ipt |
| LIBERTY_SHIP_V5_HULL_SECTION_03.stl |
| LIBERTY_SHIP_V5_HULL_SECTION_04.ipt |
| LIBERTY_SHIP_V5_HULL_SECTION_04.stl |
| LIBERTY_SHIP_V5_HULL_SECTION_05.ipt |
| LIBERTY_SHIP_V5_HULL_SECTION_05.stl |
| LIBERTY_SHIP_V5_HULL_SECTION_06.ipt |
| LIBERTY_SHIP_V5_HULL_SECTION_06.stl |
| LIBERTY_SHIP_V5_HULL_SECTION_07.ipt |
| LIBERTY_SHIP_V5_HULL_SECTION_07.stl |
| LIBERTY_SHIP_V5_HULL_SECTION_08.ipt |
| LIBERTY_SHIP_V5_HULL_SECTION_08.stl |
| LIBERTY_SHIP_V5_HULL_SECTION_09.ipt |
| LIBERTY_SHIP_V5_HULL_SECTION_09.stl |
| LIBERTY_SHIP_V5_HULL_SECTION_10.ipt |
| LIBERTY_SHIP_V5_HULL_SECTION_10.stl |
| LIBERTY_SHIP_V5_HULL_SECTION_11.ipt |
| LIBERTY_SHIP_V5_HULL_SECTION_11.stl |
| LIBERTY_SHIP_V5_HULL_SECTION_12.ipt |
| LIBERTY_SHIP_V5_HULL_SECTION_12.stl |
| LIBERTY_SHIP_V5_HULL_SECTION_13.ipt |
| LIBERTY_SHIP_V5_HULL_SECTION_13.stl |
| LIBERTY_SHIP_V5_LIFEBOAT.stl |
| LIBERTY_SHIP_V5_MAST_HEAD.stl |
| LIBERTY_SHIP_V5_MIDSHIPS_VENT_COWL.stl |
| LIBERTY_SHIP_V5_RUDDER.stl |
| LIBERTY_SHIP_V5_SINGLE_PIECE_HULL.stl |
| liberty_ship_v5_single_piece_hull.stp |
| LIBERTY_SHIP_V5_SINGLE_PIECE_SUPERSTRUCTURE.stl |
| LIBERTY_SHIP_V5_SUPERSTRUCTURE_01.stl |
| LIBERTY_SHIP_V5_SUPERSTRUCTURE_02.stl |
| LIBERTY_SHIP_V5_SUPERSTRUCTURE_03.stl |
| LIBERTY_SHIP_V5_TWO_PIECE_HULL_LOWER.stl |
| LIBERTY_SHIP_V5_TWO_PIECE_HULL_UPPER.stl |
| LIBERTY_SHIP_V5_VENT_COWL.stl |
| lib_ship_rudder_20mm_tail.stl |
| lib_ship_rudder_25mm_tail.stl |
| lib_ship_rudder_30mm_tail.stl |
| rudder_drum.stl |
