LHM Silicone Mask Mold 3D Printer Model
The file 'LHM Silicone Mask Mold 3D Printer Model' is (stl) file type, size is 4.3MB.
The file 'LHM Silicone Mask Mold 3D Printer Model' is (stl) file type, size is 4.3MB.
First of all: this mask is a prototype and has not been tested or approved by any field specialist, so use it at your own risk.
Second: I made the mask as a proof of concept and didn’t work on the fine details like sanding the printed parts that would make the mask look way better and without any flaws that you might observe in this video. also the silicone rubber i used is not designed or recommended by the producer as a skin friendly material and even though i had no problems wearing the mask, i would recommend choosing a skin safe silicone material like the dragon skin silicone rubber.
Links for various silicone rubbers:
What i used: https://www.zhermack.com/en/product_category/industrial/
Data sheet: https://www.zhermack.com/public/uploads/F800021-16-04_Cat_Ind_EN_low.pdf
Dragon skin: https://www.smooth-on.com/products/dragon-skin-10-fast/
I am still improving the mask so feel free to comment if you encounter any problems or have new ideas on how to make this mask better.
| LHM_MASK_CLIP_V1.stl | 56.9KB | |
| LHM_MOLD_EXT_MIRROR_V1.stl | 3.6MB | |
| LHM_MOLD_EXT_V1.stl | 3.6MB | |
| LHM_MOLD_HOLE_BOLT_V1.stl | 136.5KB | |
| LHM_MOLD_HOLE_CAP_V1.stl | 108.2KB | |
| LHM_MOLD_HOLE_RING.stl | 14.1KB | |
| LHM_MOLD_INT_V1.stl | 5.9MB |
