LGB Locomotive Conversion With Tender 3D Printer Model
The file 'LGB Locomotive Conversion With Tender 3D Printer Model' is (stl) file type, size is 832.1KB.
The file 'LGB Locomotive Conversion With Tender 3D Printer Model' is (stl) file type, size is 832.1KB.
I wanted to make a larger locomotive out of the cheapest LGB starter set I could find.
This little yellow 0-4-0 engine now has a open cab and a little tender.
This is pure imagination, the only thing I based something off of, are the wheels. They are somewhat similar to old Norwegian type spoked wheels.
Everything is to be printed flat, glued together.
2x 52mm brass/steel rod (3mm diameter)
4x bushings 5x5x3mm
Some 1,5mm brass rods for handles
Superglue.
There is 2 files for the tender. One wich is split, and one complete. I recommend printing the complete one upside-down. With supports ofcourse.
The pictures provided are of the prototype. I am still finishing details on this one. Updates will come when ready.
I also uploaded a snowplow and a new buffer for the front of this locomotive.
Have fun!
| Cabsides_x2M.stl | 383.4KB | |
| Cab_front_x1.stl | 258.7KB | |
| Cab_rear_piece_x1.stl | 82.5KB | |
| Cab_roof_frame_rear_x1.stl | 16.9KB | |
| Cab_Roof_x1.stl | 20.3KB | |
| Cab_window_cover_x1.stl | 3.0KB | |
| Tender_1_piece.stl | 1.5MB | |
| Tender_Frame_x1.stl | 756.4KB | |
| Tender_Walls_x1.stl | 612.8KB | |
| Tender_Water_Tank_x1.stl | 282.2KB | |
| Wheel_x4.stl | 374.6KB |
