The file 'Leveling Feet With Mild Shock Absorbing Capability For Snapmaker J1/J1S With Construction Zone Caution Theme 3D Printer Model' is (stl) file type, size is 651.8KB.
If your 3D printer is a constant "construction zone" why not replace the feet on your printer with the yellow/black construction caution theme.
This replaces the four feet on the bottom of the Snapmaker J1/J1S with feet that have a "construction zone caution" theme.
There are two sizes to adapt to whatever situation there is.
I printed the black color with PLA+ and the yellow with TPU to provide some modest vibration isolation between the printer and worktable. If this is not desired the entire thing can be printed in PLA+.
This requires four (4) M6x1.0 1cm long bolts to mount the tops to the threaded insert on the bottom of the printer.
Have fun!
| Short_Foot_Black.stl | 265.5KB | |
| Short_Foot_Yellow_.stl | 333.3KB | |
| Short_Top_Black.stl | 186.3KB | |
| Short_Top_Yellow.stl | 79.6KB | |
| Tall_Foot_Black.stl | 202.5KB | |
| Tall_Foot_Yellow.stl | 550.3KB | |
| Tall_Top_Black.stl | 234.5KB | |
| Tall_Top_Yellow.stl | 74.7KB |
