Lethal Company Player Helmet Split 3D Printer Model
The file 'Lethal Company Player Helmet Split 3D Printer Model' is (stl) file type, size is 9.9MB.
The file 'Lethal Company Player Helmet Split 3D Printer Model' is (stl) file type, size is 9.9MB.
A Remix of Lethal Company Player Helmet by Maker_Wizard87
This remix changes the main helmet to be broken into 6 parts for ease of printing on smaller printers (220mm x 220mm x 250mm and up) . Respirators have been made hollow to save printing material and time.
This is my first upload to the site. There are some things id done differently now, but it prints good. Make sure horizontal expansion is set to 0mm
Update 12/29/2023 : Fixed "Ear Cups" to have less geometry errors and can now be sliced by a 3d printer more successfully. And the respirators are now hollow to save printing material
Update 1/1/2024 : Added an alt version of the "Ear Cups" to have a hex bolt design on them instead of a round bit. Also added two braces that are optional to be glue to inside of the helmet if it feel necessary to give it strength
| Alt_EarCup_L.stl | 2.9MB | |
| Alt_EarCup_R.stl | 2.9MB | |
| Back_Brace.stl | 106.1KB | |
| EarCupL.stl | 2.6MB | |
| EarCupR.stl | 2.6MB | |
| HelmetBottomBack.stl | 796.4KB | |
| HelmetBottomFront.stl | 1.5MB | |
| HelmetTopBack.stl | 969.3KB | |
| HelmetTopFront.stl | 1.4MB | |
| Respirator_Left.stl | 1.8MB | |
| Respirator_Right.stl | 1.8MB | |
| Top_Brace.stl | 132.3KB |
