Decided to remake the apparatus from Lethal Company as a desktop lamp! You may need to scale down the AppSpoke when printing I had to print the sides of mine at 92% while the length stayed at 100% for it to fit into the holes. The only additional things you will need for this project are a g9 LED bulb + socket and a replacement lamp cord like the ones in the links below. You'll also need a soldering iron and some heat shrink tubing to solder the wires together.
g9 LED bulb: https://a.co/d/hetTHFd
g9 socket: https://a.co/d/ffy49Dd
Lamp cord: https://a.co/d/bdfLnx1
Feel free to show off yours once you're done or remix it to your liking!
Also since this is the first project I've made let me know any advice you think I should know.
| Apparatus.step | 724.5KB | |
| ApparatusBottom.stl | 1.3MB | |
| ApparatusBottomScrew.stl | 391.0KB | |
| ApparatusLight.stl | 148.0KB | |
| ApparatusSpoke.stl | 67.6KB | |
| ApparatusTop.stl | 673.1KB |
