Leonidas (Fully Functional) – Bakugan 3D Printer Model
The file 'Leonidas (Fully Functional) – Bakugan 3D Printer Model' is (stl) file type, size is 6.9MB.
The file 'Leonidas (Fully Functional) – Bakugan 3D Printer Model' is (stl) file type, size is 6.9MB.
Summary
Leonidas
Update 2024-01-10: Neo Dragnoid has 2 different spring variations. Left and Right Arm Alt is for the other spring set. Print both if you dont know which spring set you have.
Resin printing is HIGHLY recommended
Finally releasing the fully functioning Leonidas! I used a Neo Dragonoid (Legacy) but make sure to check the springs as only one version of Neo will have the right springs for this. You can easily check by the side flaps on Neo, the springs will have an arm that goes down, that is the one you want to use.
Video: https://www.instagram.com/p/C1c-K_LLn5j/
Manual is still available for those who only want a shelf piece without all the hassle
https://www.thingiverse.com/thing:5833249
Pin hole: 1.6mm
Recommended pin size: 1.4mm-1.5mm
| Back.stl | 2.0MB | |
| Body.stl | 2.4MB | |
| Head.stl | 1.1MB | |
| Horn.stl | 88.5KB | |
| Inside_Hook.stl | 68.2KB | |
| LeftLeg.stl | 573.4KB | |
| Left_Arm.stl | 889.0KB | |
| Left_Arm_Alt.stl | 910.5KB | |
| Left_Wing.stl | 3.4MB | |
| Neck.stl | 124.2KB | |
| Right_Arm.stl | 889.0KB | |
| Right_Arm_Alt.stl | 910.5KB | |
| Right_Leg.stl | 573.4KB | |
| Right_Wing.stl | 3.4MB | |
| Tail.stl | 996.2KB |
![Darkus Gauntlet[Bakugan Battle Brawlers] 3D Printer Model](https://cdn.3axis.co/assets/16/ea/4d/a2/16ea4da2-7b18-4b25-a12c-b282782a24b6/images/5dea2511-a24a-4807-9a18-5711c43594d0_thumb.jpg)
