Leonardo Lamp Base 3D Printer Model
The file 'Leonardo Lamp Base 3D Printer Model' is (stl) file type, size is 42.4MB.
The file 'Leonardo Lamp Base 3D Printer Model' is (stl) file type, size is 42.4MB.
Leonardo Table Lamp Base for Philips Hue Lightguide bulbs
Inspired by Table Lamp for Lightguide. The time and material to print this may cost about the same as just buying one, but this has it's own design, and you get to choose the color. If you want a perfect fit/inlaid base, I suggest you buy one from Philips here https://www.philips-hue.com/en-us/products/smart-light-accessories?page=2
Disclaimer: Use at your own risk. This is not a UL tested item, it is DIY. I am not responsible for injury from fire, electrocution, or any other potential ways DIY electrical could injure one. I also do not take responsibility for structural damage, loss, etc. etc. from the construction or usage of this item. Do not use in wet locations. Have electrical knowledge, common sense of heat. Use Phillips Hue Lightguide Bulbs only, Max temp of a Philips Lightguide bulb is 45°C (113°F), PETG deflection is around 70°C (158°).
I am newer to the 3D printing world, if you have suggestions on reducing the STL, message me and I will test and change files, but for now, these are large print files. Thanks.
| First_run_A1_020mm.stl | 40.5MB | |
| First_Run_Base_Bottom.stl | 360.8KB | |
| First_run_P1P_020mm.stl | 43.0MB |
