Lens Hoods For OMDS 150-400 Pro 3D Printer Model
The file 'Lens Hoods For OMDS 150-400 Pro 3D Printer Model' is (stl) file type, size is 3.6MB.
The file 'Lens Hoods For OMDS 150-400 Pro 3D Printer Model' is (stl) file type, size is 3.6MB.
These are a collection of lens hoods for the Olympus/OMDS 150-400 Pro Lens.
There are two styles available..
One is a Fixed hood alternative to the rather expensive OEM version in half and third lengths with ribbed and smooth versions.
Requires a single 20mm M4 threaded machine screw.
Second is a reversible design that is two parts, Part a is an adapter ring that mounts to the lens, this part requires two M3 grub screws preferable 10mm long but 8mm works as well.
The other parts are hoods both ribbed and smooth in 40/60/120mm lengths.
The smooth walled versions are ideal to line with self adhesive black felt.
It is recommended to print these in Black (matt) PETG or ABS, the matt look can be achieved by using Carbon Fibre versions of the filaments.
In both fixed and reversible designs there are trim rings to bling the hood out and custom Caps.
Both should be printed in TPU-95A in any colour you like.
Note these are a very tight accurate fit by design and will require an accurate and dimensional accurate printer for good results.
Adapters and reversible hoods require supports to the used.
Fixed hoods can be printed wihout support.
| Fixed_Hood_End_Cap.stl | 567.8KB | |
| Fixed_Hood_Trim_Ring.stl | 347.2KB | |
| Fixed_Lens_Hood_60L_Ribbed.stl | 1.4MB | |
| Fixed_Lens_Hood_60L_Smooth.stl | 555.7KB | |
| Hood_Adapter_for_reversible_hoods.stl | 1.2MB | |
| RevHood_120L_Smooth.stl | 990.6KB | |
| RevHood_40L_Ribbed.stl | 1.1MB | |
| RevHood_40L_Smooth.stl | 996.7KB | |
| RevHood_60L_Ribbed.stl | 1.6MB | |
| RevHood_60L_Smooth.stl | 1.1MB | |
| Rev_Hood_Cap.stl | 690.4KB | |
| Trim_Ring_Rev_Hood_Long.stl | 469.9KB | |
| Trim_Ring_Rev_Hood_short.stl | 470.4KB |
