Lens Hood For Kodak Aero-Ektar 7 In F2.5 3D Printer Model
The file 'Lens Hood For Kodak Aero-Ektar 7 In F2.5 3D Printer Model' is (stl) file type, size is 288.7KB.
The file 'Lens Hood For Kodak Aero-Ektar 7 In F2.5 3D Printer Model' is (stl) file type, size is 288.7KB.
Here's a lens hood for the Kodak Aero-Ektar 7 in (178 mm) F2.5 lens. It is attached to the so-called "short lens hood" that came standard with most versions of the lens. The hole on the side is for an M3 threaded insert. Purchase one with an outer diameter of 5 mm and depth of 4 mm. Get an M3 x 12mm hex socket cap screw and screw it into the knurled knob.
If you're like me and shoot the AE outdoors, you should use a material that withstands some heat (so no PLA). I'm using Bambu Labs PAHT-CF in the photo.
| AeroEktar_Lens_Hood.stl | 70.8KB | |
| Knob.stl | 1006.3KB |
