The file 'Lenovo M90q AOC-STGN-I2S V2 Network Card Bracket 3D Printer Model' is (f3d,step,stl,gcode) file type, size is 1.0MB.
This is a remix of the AOC-STGN-I2S v2 bracket designed by simbaja. His model was made for the M720q however I have a M90q which while very similar they changed the bracket area on the M90q ever so slightly causing the original design to no longer work.
I have made adjustments to all the areas necessary on this bracket so that it fits the Lenovo M90q tiny PC with a Supermicro AOC-STGN-I2S v2 SFP+ dual NIC.
I have only tested this design on the original M90q (not the gen 2 or gen 3 versions). When installing this the legs of the bracket should be on the underside of the network card. I found it easiest to install the network card first, then tilt it up slightly and push this bracket onto it to get it mounted.
| M90q_AOC-STGN-I2S-v2.f3d | 177.7KB | |
| M90q_AOC-STGN-I2S-v2.step | 690.5KB | |
| M90q_AOC-STGN-I2S-v2.stl | 350.9KB | |
| M90q_AOC-STGN-I2S-v2__0.2mm_PrusaPETG_55m.gcode | 2.6MB |
