https://www.myminifactory.com/users/NEMO_MK2
https://cults3d.com/en/users/NemoMK2/creations
Please visit here to see my models :)
Legolized gundam as you see :)
The height is about 13.5 cm.
All parts are separated as their color.
And pre supported. Supports that generated in slicer program are not needed.
You need WHITE, BLUE, YELLOW, GREY, RED and CLEAR RED filaments for this model.
This model is in mm unit.
Print and assemble as instructions.
Most parts are printable with any print settings.
But, I suggest make brim(Print adhesion) for SHIELD and GUN parts for more safe print.
Use nomal version files for print. And If you need not pre supported files, use noPreSupport vesions. (It's marked on file names.)
Have fun :)
| legoGundam_blue.stl | 85.3KB | |
| legoGundam_bluenoPreSupport.stl | 85.3KB | |
| legoGundam_clearRed.stl | 79.2KB | |
| legoGundam_clearRednoPreSupport.stl | 63.9KB | |
| legoGundam_grey1.stl | 847.1KB | |
| legoGundam_grey1noPreSupport.stl | 380.5KB | |
| legoGundam_grey2.stl | 476.4KB | |
| legoGundam_grey2noPreSupport.stl | 476.4KB | |
| legoGundam_grey3.stl | 120.8KB | |
| legoGundam_grey3noPreSupport.stl | 96.4KB | |
| legoGundam_red1.stl | 8.9KB | |
| legoGundam_red1noPreSupport.stl | 8.9KB | |
| legoGundam_red2.stl | 73.6KB | |
| legoGundam_red2noPreSupport.stl | 73.6KB | |
| legoGundam_red3.stl | 5.6KB | |
| legoGundam_red3noPreSupport.stl | 5.6KB | |
| legoGundam_white1.stl | 10.4MB | |
| legoGundam_white1noPreSupport.stl | 10.1MB | |
| legoGundam_white2.stl | 17.9KB | |
| legoGundam_white2noPreSupport.stl | 17.9KB | |
| legoGundam_white3.stl | 279.2KB | |
| legoGundam_white3noPreSupport.stl | 258.3KB | |
| legoGundam_white4.stl | 138.9KB | |
| legoGundam_white4noPreSupport.stl | 130.6KB | |
| legoGundam_yellow1.stl | 77.5KB | |
| legoGundam_yellow1noPreSupport.stl | 77.5KB | |
| legoGundam_yellow2.stl | 63.9KB | |
| legoGundam_yellow2noPreSupport.stl | 63.9KB |
