Lego Technic Supercar-Series Wall Mounts (Porsche, Bugatti, Lamborghini, Ferrari) 3D Printer Model
The file 'Lego Technic Supercar-Series Wall Mounts (Porsche, Bugatti, Lamborghini, Ferrari) 3D Printer Model' is (stl) file type, size is 2.0MB.
The file 'Lego Technic Supercar-Series Wall Mounts (Porsche, Bugatti, Lamborghini, Ferrari) 3D Printer Model' is (stl) file type, size is 2.0MB.
These wall-mounts for the Lego Technic supercar series display the cars perfectly aligned.
The bases of all three mounts are the same and feature a cross for alignment. Each mount is designed in a way, that the front axle of each car is on the same height, which is represented by the horizontal line of the cross. So just line up all mounts via this line and it will look perfect. The placement of the hooks on the cars is chosen with care, so the model won't loosen and fall down. The placement is highlighted in pink in the picture attached.
For printing you should use grid infill with at least 10%. PLA works just fine.
Installation works best with a laser level, but it also works great without. The mounting holes are 4mm in diameter, so they work best with 3.5 mm oder 4 mm countersunk screws. You can also just use the upper screw, that will be enough to hold it. Make sure they fit flush with the top surface in order to avoid scratches on your cars.
Versions & Changes:
v1_1: Added versioning, bugatti hook width corrected
Ferrari Daytona wall mount added
| bugatti_chiron_wall_mount_v1_1.stl | 3.9MB | |
| ferrari_daytona_wall_mount_v1.1.stl | 1.2MB | |
| lamborghini_sian_wall_mount_v1_1.stl | 4.1MB | |
| porsche_gt3rs_wall_mount_v1_1.stl | 3.0MB |
