This is a 1:1 scale Lego Skeleton featuring Lego compatibility, functioning ball joint arms, and a printed skull face. It is designed to be printable with a standard .4mm nozzle. Please read these notes before use.

Included Files:

• skull stl
• torso stl
• arm stl
• left leg stl
• right leg stl (identical to left, but rotated axially 180 degrees)
• full skeleton stl
• Stock Creality Ender 3 Pro Full Skeleton GCode

The print shown in the images was done using the included Gcode (SEE NOTES) on a stock Creality Ender 3 Pro with the stock .4mm nozzle and .06mm layer height at 100% infill.

GCODE NOTES: Programmed specifically for use on the Creality Ender 3 Pro. Other printers may not be supported. Use at your own risk. Be advised, gcode uses 215C nozzle temp and 63C build plate temp for the filament I used, you may need to tune your machine on the fly for your filament. Printed directly on the magnetic build plate. First layer prints at .06mm height. Print time 1 hour 45 mins.

Slicer Setting Recommendations:

• Support Structures: touching build plate only.
• Ensure first layers print at .06mm increments for best surface finish.

Printer Setting Recommendations:

• Reduce speed of first 2 layers to 25% of nominal for smooth finish on back of torso and bottom of skull

Other Notes:

• The supports for the ball joint socket of the arms can be carefully trimmed with nippers
• This project is a compilation of models produced by others as well as my own (see design notes). Not intended for commercial use or resale.
• Silver filament makes it look like the Terminator
• Patience is a virtue

HAPPY PRINTING!