Lego Man Figure – Print In Place 3D Printer Model
The file 'Lego Man Figure – Print In Place 3D Printer Model' is (stl) file type, size is 6.2MB.
The file 'Lego Man Figure – Print In Place 3D Printer Model' is (stl) file type, size is 6.2MB.
A fully actuated lego man figure that requires no assembly - Just draw the face on with a sharpie after printing.
Print in place, with no supports and all of the joints move.
Check out the Skeleton version here: https://www.thingiverse.com/thing:6792575
There are 4 versions:
The model by default is 150% scale and is 60mm tall.
Tested on a Prusa Mini, Prusa 3S and Bambu Labs.
0.15mm layers, 15% infil, no supports.
| LegoMan_EasyPrint.stl | 4.7MB | |
| LegoMan_Large_Tolerance.stl | 4.7MB | |
| LegoMan_Normal_Tolerance.stl | 4.7MB | |
| LegoMan_Small_Tolerance.stl | 4.7MB |
