LEGO Compatible Rideable And Movable Horse 3D Printer Model
The file 'LEGO Compatible Rideable And Movable Horse 3D Printer Model' is (stl) file type, size is 516.3KB.
The file 'LEGO Compatible Rideable And Movable Horse 3D Printer Model' is (stl) file type, size is 516.3KB.
I finally have my own 3D printed LEGO compatible horse. Now that I have a castle, I thought it was about time. Since I used the LDCad file of a LEGO horse as a basis, the design looks very similar to the LEGO horse with the number 4493c01pb01, just that this one is plain for obvious reasons. To assemble the horse you need the two parts "Horse-Body-Left" and "Horse-Body-Right", as well as the head parts "Horse-Head-Left" and "Horse-Head-Right". These are connected with the respective connectors, two of each type. You don't need any glue for this, although you may need a little sandpaper, but for me it worked without it and it holds wonderfully. Optionally you can also use the “Horse-Top” when no minifigure is riding, but this is not absolutely necessary. However, if you want to add style to your riding minifigures, I recommend you also check out my saddle, available HERE. All parts are very tight, but with my settings everything works perfectly, but for some of you it may happen that you have to sand a little. Hope you enjoy.
| Horse-Body-Connector-2x.stl | 23.3KB | |
| Horse-Body-Left.stl | 449.8KB | |
| Horse-Body-Right.stl | 286.3KB | |
| Horse-Head-Connector-2x.stl | 23.3KB | |
| Horse-Head-Left.stl | 338.9KB | |
| Horse-Head-Right.stl | 334.7KB | |
| Horse-Top.stl | 2.0KB |
