Lego Compatible Axles & Tires 3D Printer Model
The file 'Lego Compatible Axles & Tires 3D Printer Model' is (stl) file type, size is 240.0KB.
The file 'Lego Compatible Axles & Tires 3D Printer Model' is (stl) file type, size is 240.0KB.
These are Lego compatible wheel and axle assemblies. Once the tires are installed they are not designed to be removed. Pinching the axe forks with needle nose pliers may aid in installation. Insure that there are no irregularities inside the hubs or on the axle ends as this will cause binding. The parts can be slightly scaled prior to slicing if there is a compatibility problem, but this should not be an issue.
If parts are printed in PETG using these settings may prevent boogers
Retract Length = 0.4
Lift Z = 0
Retract Speed = 35
| 2x2_axle.stl | 131.1KB | |
| 2x4_axle.stl | 284.5KB | |
| 4x2_axle.stl | 222.7KB | |
| tire.stl | 116.5KB |
