Lego Brio Train Wheel Set 3D Printer Model
The file 'Lego Brio Train Wheel Set 3D Printer Model' is (stl) file type, size is 60.8KB.
The file 'Lego Brio Train Wheel Set 3D Printer Model' is (stl) file type, size is 60.8KB.
This is a converter wheelbase that makes you makes you build Lego trains and drive them on your Brio/Ikea tracks.
It consist of a base, wheels and a center that can tilt in the base, so the train can drive over bridges. On the center I have glued on a lego turntable.
You can get the turntables directly from lego https://shop.lego.com/da-DK/Pick-a-Brick search for "turn plate"
or you can use a site like BrickOwl https://www.brickowl.com/catalog/lego-turntable-2-x-2-with-medium-stone-gray-top-74340
Finding the right magnet can be a hassle. I used a Ø13x3,9xØ3,5mm ferrite ring magnet, that works really well.
https://larko.dk/ferrit-ring-magnet (Danish site)
If you find any other magnets that works, please put it in the comments.
I mounted the magnet with a 11mm round headed nail, so the trains can turn without disconnecting each other.
https://www.stofogstil.dk/polstersoem-11mm-oxid-30stk-49060/ (Danish site)
I cut the head of a 1,4mm nail to mount the center and some 2mm nails to mount the wheels. These I had laying around, so no links for those.
| Base_v15.stl | 164.3KB | |
| Center.stl | 67.0KB | |
| Wheel.stl | 45.0KB |
