Legend Of Zelda BOTW/TOTK Royal Claymore 3D Printer Model
The file 'Legend Of Zelda BOTW/TOTK Royal Claymore 3D Printer Model' is (stl) file type, size is 3.5MB.
The file 'Legend Of Zelda BOTW/TOTK Royal Claymore 3D Printer Model' is (stl) file type, size is 3.5MB.
BLADE SEGMENT 4 WAS FOUND TO CAUSE ISSUES ON CURA BASED SLICERS, UPDATED AND FIXED PART UPLOADED ON 4/5/2024.
IF YOU USE CURA BASED SLICERS PLEASE RE-DOWNLOAD SEGMENT 4.
PURSA/BAMBU BASED SLICERS ARE UNAFFECTED
Royal Claymore from the switch line of Zelda games.
To print this you will need the following items
-72" long 3/4" thick wooden dowel
-36" long 5/16" thick wooden dowel
-saw to cut dowels to length
-two part epoxy to glue all parts to dowels, i use JBweld plastic bonder
-strong fast curing glue for hilt, i use krazy glue after sanding the two attaching surfaces.
for printing i would suggest printing the 3 grip parts and pommel with a high infill (20% or more) and for the hilt and blade a low infill (10% is what i used)
for most parts minus the pommel i used tree supports and pommel was normal supports.
the blade tip(segment 6) and grip bottom i did not use supports, if you do make sure you block supports from the inner support holes or have fun trying to get them out.
as for blade segment 1 left and right you will need supports but make sure you use a support blocker for the 5/16 support holes
this required 1.8kg of fillament and took 20 hours of printing on two printers at 180mm/s overall speeds.
anything else ask in the comments and i'll try to answer or will add here.
| royal_claymore_blade_segment_1_left.stl | 201.5KB | |
| royal_claymore_blade_segment_1_right.stl | 202.8KB | |
| royal_claymore_blade_segment_2_left.stl | 346.3KB | |
| royal_claymore_blade_segment_2_right.stl | 351.5KB | |
| royal_claymore_blade_segment_3.stl | 453.4KB | |
| royal_claymore_blade_segment_4.stl | 787.9KB | |
| royal_claymore_blade_segment_5.stl | 168.8KB | |
| royal_claymore_blade_segment_6.stl | 46.9KB | |
| royal_claymore_grip_bottom_half.stl | 2.0MB | |
| royal_claymore_grip_top.stl | 76.6KB | |
| royal_claymore_grip_top_half.stl | 2.0MB | |
| royal_claymore_hilt_center.stl | 234.1KB | |
| royal_claymore_hilt_left_wing.stl | 656.8KB | |
| royal_claymore_hilt_right_wing.stl | 656.6KB | |
| royal_claymore_pommel.stl | 603.9KB |
