Lee Six Pack Pro – Adapter For Low Primer Warning Proximity Sensor 3D Printer Model
The file 'Lee Six Pack Pro – Adapter For Low Primer Warning Proximity Sensor 3D Printer Model' is (stl) file type, size is 482.8KB.
The file 'Lee Six Pack Pro – Adapter For Low Primer Warning Proximity Sensor 3D Printer Model' is (stl) file type, size is 482.8KB.
Adapter to mount an 18mm metallic proximity sensor on the primer chute of the Lee Six Pack Pro.
You need a normally closed (NC) sensor (meaning the circuit is closed when sensor is not activated). Both PNP and NPN should work, depending on how you want to wire it. You also need a power source and a buzzer or light. Maybe also a resistor and relay, again depending on how you want to wire it.
I used this sensor:
https://www.amazon.co.uk/gp/product/B094XM2G3G/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&th=1
And this buzzer:
https://www.amazon.co.uk/gp/product/B0BLTWQ89R/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
I also used a resistor to lower the volume of the buzzer, and connected it all in the control box for my bullet- and casefeeder.
| M18_proximity_sensor_adapter.stl | 1.1MB |
