This keeps the indexing rod farther upward at all times and solves the issue my turret was having in not reaching the detent when auto-indexing.
The turret would be just fractions of an inch before the detent and rotating the ratchet mechanism counterclockwise on the press would fix the issue. However, that would make the rod off-center and it would eventually end up back in the middle and repeat the problem.
Updates
1.09
Got the pin under the indexing rod
1.08
I'm still working on dialing this thing in exactly to put the protrusion directly under the indexing rod.
1.07
Refined locating geometry.
| Lee_Classic_Press_4_Turret_Indexing_Detent_Fix_v1.09.stl | 73.5KB |
