LEDs Ready For Fiber Optics 3mm – 10mm 3D Printer Model
The file 'LEDs Ready For Fiber Optics 3mm – 10mm 3D Printer Model' is (stl) file type, size is 521.9KB.
The file 'LEDs Ready For Fiber Optics 3mm – 10mm 3D Printer Model' is (stl) file type, size is 521.9KB.
This is my first STL. I needed a way to add custom sized LEDs to my project. My project has through holes that are 3mm in size. I built a sample of LEDs ranging from 3mm - 10mm with a attachment of 3mm at the end of it.
The idea is you would print the LED size you want and stick the end of it through a 3mm hole. Then you can run fiber optics to it and use a heat shrink tubing on the end of it to make sure light only escapes through the LED end.
But instead of sanding down the LED end, you would attach the fiber optics to the long 3mm pole end.
I printed mine using 100% infill and the honeycomb supports on a Prusa mk3s+
::Notes::
You have my permission to use this how ever you like.
| leds_3mm_through_10mm_for_fiber_optics.stl | 1.7MB |
