Everything was printed on the Anycubic Photon Mono
You need one 5mm LED and a small 0.5mm wire
These were the settings for the sphere on lithophanemakers.com
Lithophane Resolution: 0.05
Sphere Diameter: 50
Picture Angular Height: 90
Picture Angular Width: 135.00
Maximum Thickness: 2.4
Minimum Thickness: 0.6
Cylinder Outer Diameter: 13.1
Cylinder Height: 10
Cylinder Thickness: 2
Cylinder Ledge Outer Diameter: 17
Top Hole Outer Diameter: 0
X Shift: 0.5
Y Shift: 0.00
| Cap.stl | 280.7KB | |
| Cap.stp | 46.8KB | |
| LR44_Holder.stl | 1.3MB | |
| LR44_Holder.stp | 465.5KB |
